5 mistakes a seamstress makes when working on a sewing machine

Posted by

In this article, we will tell you about the five most common mistakes that beginner seamstresses, and not only beginners, make when working on a sewing machine. If you are just learning to sew, we recommend that you read this article to understand the reasons for poor-quality stitching, and only enjoy your sewing machine.
Find more options here: https://justsewn.com/best-industrial-sewing-machines/

Mistake # 1. Incorrect threading of the sewing machine

And this should be given special attention. As strange as it may sound, it is in threading that mistakes are often made. Let’s see what you need to pay special attention to.
The thread on the bobbin must be tightly wound; it is imperative to thread the bobbin threads into the tensioner. If the thread is not wound tightly, it will be necessary to rewind it, before increasing the tension in the tensioner. Be sure to raise the presser foot before threading the upper thread when we thread it into the tensioner. After that, the tension plates will move apart and the thread will go directly into the tensioner, as a result, your sewing machine will not loop. Remember to always thread the thread take-up to avoid additional problems when sewing.
When the machine is threaded in and, it would seem, you can just start sewing, we still recommend that you first lower the needle halfway into the fabric, then slightly pull the thread behind the foot in the direction of the fabric movement so that the beginning of the sewing is beautiful, and after making a couple of stitches, release the thread, continuing sewing.

READ  What is the Best Website to Unlock an Apple iPhone 7?

Mistake # 2. Incorrect matching of the size and purpose of the needle and the thickness of the thread to the sewing fabric

At the same time, many complain that the line on a household sewing machine generally turns out to be bad – it is performed with a herringbone, the stitch looks now to the right, then to the left, the line itself walks, lies like a rope, and the like. The reason for this is your incorrect selection of the appropriate thread, needle and fabric. This problem is observed not only among beginners, but even among experienced seamstresses. That is, a thin fabric is taken, for example coarse calico, a needle No. 100 and a thick thread No. 30 or No. 40 are inserted, and sewing begins. Of course, in this case, the thickness of the fabric will not be enough for the knot to hide. Plus, the thick thread can be laid down as you like. Therefore, our recommendation is to always carefully select the needle and thread for the fabric being sewn.
Moreover, to help the sewing machine make a beautiful straight stitch, you also need to use the dedicated straight stitch foot. With this foot, you can get the perfect stitch when sewing chiffon, cambric, tulle and similar fabrics.
Only this complex will allow you to make a high-quality straight stitch without “Christmas trees”, which will be as close to ideal as possible.

READ  What Types Of Speakers Are There?

Mistake number 3. Wrong end of sewing and stitching

You sewed a stitch on the sewing machine, of course, following the first two rules, which we described above, but trying to pull the fabric out from under the raised foot , you also pull out two threads from the shuttle and one from the needle plate. All this causes a mess and prevents you from stretching the fabric properly. At the same time, you may also have a desire to forcefully tear off the stretching threads , which is certainly the wrong decision. And the problem is as follows.
For the sewing machine to complete one revolution, that is, one stitch, it must go through a full cycle. How do we know that this cycle is complete? Even if our needle is in the upper position, this does not mean that the stitch has been completed. Only when the thread take-up is in the up position will the machine have completed a full turn of the stitch. And after that, you can easily pull only two threads, one needle and the second from the shuttle, since the shuttle will have time to throw off the thread at this moment, completely completing its stitch, and you will easily get the fabric without causing damage to the machine and the quality of the stitch.

READ  SMS SPY Apps | All About their Working and Legality

Mistake # 4. Incorrect pulling of the fabric from under the foot, resulting in damage to the sewing machine and needle

This is a fairly common problem when a beginning seamstress finishes sewing, lifts the foot, takes out the fabric and pulls it along with the threads. At this moment, the thread receives more resistance, the needle deflects, bending. By doing these irregular movements over and over again, you end up with a bent needle, which one day while sewing can hit the stitch plate and break. In theory, even a sewing machine can break, loop formation can be lost. Therefore, such stretching of the fabric is unacceptable.

Mistake # 5. Turning the handwheel away from you and switching stitches with the needle lowered into the fabric

This is due to insufficient experience in working with a sewing machine. Beginners turn the flywheel clockwise, that is, away from themselves, which leads to tangling of the thread. Or, for example, they switch to other stitches with the needle lowered into the fabric, which can subsequently lead to poor-quality stitching, as well as to the breakdown of the machine and other consequences arising from this.
By avoiding the above mistakes in your daily work, you will not only save your sewing equipment, which will successfully perform its functions for many years, but you will also be able to save a lot of money.

Leave a Reply

avatar
  Subscribe  
Notify of